Tel: 0208 - 5533 - 334
Mob: 07944561111

For security and peace of mind, all businesses will require a robust and visible deterrent of some sort; the security roller shutter is the answer. Although manual shutters are still in operation, the future is the automatic shutter. Constructed from aluminium and powder coated to any standard colour.

Automatic/electric shutters are operated electrically via an externally fitted key switch, and a secondary internally fitted rocker switch. For those who prefer, the whole operation can be operated via a remote control key fob.

There are 4 main types of shutter:
1. Solid, total block slats - No visibility once shutters are down.
2. Pin hole/Perforated - Constructed from perforated slats, allowing around 30% visibility once shutters are down.
3. Punched slats - Constructed from solid slats but 'letterbox' sized holes are 'punched' out in equal intervals along each slat. Visibility is around 60%.
4. Grille - The ultimate visibility is obtained utilizing the 'chain link' grille shutter system, ideally suited where your shop window display needs to be seen once shutters are down.

Click to enlarge >>
Click to enlarge >> Click to enlarge >> Click to enlarge >> Click to enlarge >> Click to enlarge >>
Zoom
Zoom
Zoom
Zoom
Zoom
Zoom
Click to enlarge >>
Click to enlarge >> Click to enlarge >> Click to enlarge >> Click to enlarge >> Click to enlarge >>
Zoom
Zoom
Zoom
Zoom
Zoom
Zoom

Shop Front Shutters Aluminium Punched Standard Colours :

(no additional surcharge applies for standard colours)

 

White RAL9010
Brown RAL8014
Cream RAL1015
Stock Colours for Aluminium Curtain (Slats)
----------------------------------------------------------------------

 

White RAL9010
Brown RAL8014
Bottom Slat, Box & Guides
----------------------------------------------------------------------

 

Slat Profile
----------------------------------------------------------------------
Shop Front Shutters Galvanised Solid Or Perforated Steel Colours:
(We offer the following colours in Satin unless otherwise stated)

White RAL9010

SATIN

Brilliant White RAL9016

SATIN

Magnolia RAL1015

SATIN

Beige RAL1001 SATIN
Yellow RAL1018 GLOSS
Pale Green RAL6021 GLOSS
Moss Green RAL6005 SATIN
Fir Green RAL6009 SATIN
Pale Brown 8070 SATIN
Brown RAL8014 SATIN
Brown BS 08B29 SATIN
Poppy Red BS04E53 SATIN
Traffic Red RAL3020 SATIN
Dark Red RAl3011 GLOSS
Pale Blue RAL5015 SATIN
Royal Blue RAL5002 SATIN
Dark Blue RAL5003 SATIN
Dark Blue RAL5013 SATIN
Off White RAL9003 SATIN
Pale Grey RAL7047 SATIN
Pale Grey RAL7035 SATIN
Grey RAL9006 SATIN
Dark Grey RAL7015 GLOSS
Black RAL9005 SATIN
Goosewing Grey BS10A05 SATIN
Merlingrey BS18B25 SATIN
Moorland Green BS12B21 SATIN
 
Please note that the colours illustrated in this page are intended as a guide only. Reference should be made to an appropriate RAL or BS chart.
----------------------------------------------------------------------

 

Surveying your product :

 

Installation: The shutters can be fitted to the wall, window or door frame of the property. The shutters can also be installed inside the property. Ensure that the shutter cannot catch on anything that protrudes past the brick-line (i.e. door handles, window cill)? Packers may be required to avoid this.

 

1. Will the shutter catch on anything that protrudes past the brick-line (i.e. handles, window cill)? Packers may be required to avoid this.

2. If the window/door opens outwards, will it still open when the shutter is installed?

3. Do not forget that the shutter hangs down at least 55mm into the guide rails, below the head-plates/box.

4. Always measure the top, middle and bottom within the reveal of the opening.

5. Ensure that there is sufficient room for the shutter head-plates, shutter box and shutter guide rails.

6. Decide which would be the best side for the operator to be on. If electric operated, then position nearest side to the power supply.


How To Measure:

Measure the full width of the shutter (back of angles), the total height and the clear opening height and complete the options tick box below: On face-fix shutters, it is recommended that the angle/guide rails are set 75mm on from each edge of the structural opening width. If the door is to be fitted within the reveal (side fix) of the opening, the angle/guide rails will be within the structural opening.

Shutter Box Sizes:

Total height including shutter box up to 1200mm high: box size required will be 250mm.
Total height including shutter box up to 2400mm high: box size required will be 300mm

Total height including shutter box up to 2800mm high: box size required will be 350mm   

The diagram shown below is for a face-fixing manual spring and lock-operated shutter

Externally-fitted shutter.
Shutter box rolls up on the public side.

Internally-fitted shutter.
Shutter box rolls up on the customer side.

Externally-Fitted Shutter
Please Tick

Internally-Fitted Shutter
Please Tick

Full Shutter Width (Back Of Angles) = structural Opening width plus 150mm
mm

Box Size
mm

Total Height mm
   
Clear Opening Height
mm
 

 

 

ELECTRIC OPERATED

 

How To Measure:

Measure the full width of the shutter (back of angles), the total height and the clear opening height and complete the options tick box below: On face-fix shutters, it is recommended that the angle/guide rails are set 75mm on from each edge of the structural opening width. If the door is to be fitted within the reveal (side fix) of the opening, the angle/guide rails will be within the structural opening.

Shutter Box Sizes:

Total height including shutter box up to 1200mm high: box size required will be 250mm.
Total height including shutter box up to 2400mm high: box size required will be 300mm

Total height including shutter box up to 2800mm high: box size required will be 350mm   

The diagram shown below is for a face-fixing electric-operated shutter with the motor on the left. (A).

Externally-fitted shutter.
Shutter box rolls up on the public side.

Internally-fitted shutter.
Shutter box rolls up on the customer side.

Externally-Fitted Shutter
Please Tick

Internally-Fitted Shutter
Please Tick

Full Shutter Width (Back Of Angles) = structural Opening width plus 150mm

mm

Box Size
mm

Total Height mm

 

Clear Opening Height
mm

 
Please tick box A
or B to which side the motor is to be on.

 

Options Tick-Box

Manual Operated Electric operated Galvanised Steel
Solid Slats
Galvanised Perforated
Vision Slats
Powder Coated shutter
Colour Required

Aluminium Punched
Slats (in line)
Aluminium Tube And Link Style

Face-Fixing
Shutter fixed/screwed to face of wall

Reveal-Fixing
Shutter fixed/screwed within reveal of wall
Shutter Box
Above Opening
Shutter Box
In Opening

Door Shutter Window Shutter External Key Switch Internal Rocker Switch Remote Control Manual Override

 

 Delivery address :-
Please Provide Your Telephone Number:
Please Provide Your E-mail Address:
Enter Any Additional Information Here:

Once Completed, Please Click On Send Form

 
  • design by:
  • Amrit neog